Welder project Project Page 1

Welcome to OUPower.com
"Over Unity Power" Research

This Website is Created and Maintained by chris--at--OUPower--dot--com (Fix the address for it to work!)
This Project was last updated on: September 10, 2007 03:56pm v7.01

WARNING! Many, if not all of the projects described within these pages, contain dangerous and potentially fatal consequences if you do not exercise proper precautions and follow standard safety procedures. The owner of this site takes no responsibility for injury sustained by anyone attempting to duplicate or utilize any of the information on this site. The information here is strictly for Educational Purposes! -USE AT YOUR OWN RISK!

Click Here to go to my YouTube Channel!!

Click Here to go to our NEW Facebook Discussion Group! This is replacing the old Discussion Board!

Click Here to go to our ARCHIVED Discussion Boards.

Please consider donating to help support this website!

Click here to continue Drilling into Projects from sebaw

Click Here to Re-Display the Main Project Page

some pics of the cell, or maybe i should say cells...

outside tube: thickness = 1.5mm , diameter = 16mm  , length = 170mm
inner tube: thickness = 1.5mm , diameter = 13mm  , length = 180mm

gap between tubes = 1.5mm
...

electrolyte:  5% KOH , 95% Distilled water

...

Acrylic, with pvc gasket and a pressure meter up to 6 bars, bolted together for easyer
maintenance...

but i guess more than 10 psi won't be necessary or needed, i feel more like putting the thing under some vaccum and see what happens...

Holds about 7,5 liters of electrolyte when empty...